The working principle of wood pellet machine is mainly based on physical compression technology. It first feeds the raw material wood chips or wood shavings into the inside of the machine through the inlet, and then the raw material is subjected to strong squeezing force and friction under the joint action of the high-speed rotating pressure rollers and molds. During this process, the wood fibers in the raw material are rearranged and tightly combined, eventually forming the desired pellet-shaped biomass fuel.
1. Raw material preparation: wood waste such as wood blocks, branches, etc. are cut into wood chips or wood shavings of appropriate sizes.
2. Feeding: Wood chips or wood shavings are fed into the wood pellet machine through the feeding opening.
3. Compression molding: under the action of pressure rollers and molds, the wood chips or wood shavings are compressed into granules.
4. Discharge: The molded pellet fuel is discharged from the discharge port and collected for the next step.
Parameter table of wood pellet machine
| Model | Capacity | Size and Weight | Power(kw) |
| LAMS-300 | 200-300kg/h | 1300*510*1210mm 380kg | 22kw |
| LAMS-400 | 400-500kg/h | 1500*610*1800mm 750kg | 30kw |
| LAMID-470 | 800-1200kg/h | 2600*1050*2940mm 4500kg | 55kw |
| LAMD-560 | 1300-1800kg/h | 2600*1000*2400mm 5000kg | 90kw |
| LAMID-580 | 1500-2000kg/h | 2600*1350*1860mm 5000kg | 110kw |
| LAMD-600 | 2000-2500kg/h | 2600*1350*1860mm 6000kg | 132kw |
| LAMD-700 | 2500-3000kg/h | 2600*1600*2200mm 8000kg | 160kw |
| LAMD-850 | 4000-4500kg/h | 2900*1650*2100mm 11000kg | 220kw |
1. Feeder: It is used to feed the raw materials into the inside of the machine.
2. Pressure Roller: The high speed rotating pressure roller is responsible for compressing the raw material into pellets.
3. Mold: The shape and size of the mold determines the shape and size of the final pellets.
4. Discharge port: The formed pellet fuel is discharged from the discharge port.
5. Power system: provides power to the machine and drives the pressure rollers to rotate.
Wood pellet mill is widely used in the field of biomass energy, which is mainly used to produce biomass pellet fuel. This kind of fuel is characterized by environmental protection, renewable, high combustion efficiency, etc. It is widely used in many fields such as family, industry and agriculture.
1. environmental protection: wood pellet fuel is renewable energy, less pollutants produced in the combustion process, which is conducive to the protection of the environment.
2. Economical: wood pellet fuel is low cost and has a wide range of raw material sources, which reduces the production cost.
3. high efficiency: wood pellet fuel has high combustion efficiency and can provide stable heat supply.
1. Before starting the wood pellet machine, check whether the equipment is intact and undamaged, and make sure the power connection is normal.
2. Open the feeding port and feed the prepared raw materials into the machine.
3. Start the wood pellet machine, observe the operation of the pressure roller and mold to ensure the normal operation of the equipment.
4. Collect the molded pellet fuel discharged from the discharge port for subsequent processing.
5. Turn off the equipment and clean up the site after production.
1. check the parts of the wood pellet machine regularly to make sure there is no damage or wear.
2. clean and lubricate the pressure roller and mold regularly to keep them in good working condition.
3. Observe the operation of the equipment, if there is any abnormal sound or vibration, it should be stopped in time for inspection.
4. keep the environment around the equipment clean and dry during use to prevent the equipment from being damp or polluted.
